Bauknecht wt 1530 Скачать руководство пользователя страница 14

37

Programme interruption

The drying process should not be interrupted! 
Possible consequences: Heavy creasing and 
risk of scorching!

Overdrying

Excessive drying, often the result of the 
wrong choice of programme, leads to over-
drying. This causes unnecessary wear to 
articles and can lead to increased creasing.

Touch protection

The glass in the door will become hot during 
drying. Therefore, a touch protection is 
installed as standard. Do not remove this 
protection during operation!

Not suitable for machine drying

Particularly delicate textiles, e.g. B. Curtains 
made of synthetic fibres, wool items, silk, fabrics 
with metal inserts, nylon stockings, large items, 
e.g. anoraks, bed spreads, duvets, sleeping 
bags and feather bedding, as well as items 
containing mainly foam rubber or rubber-like 
material, must not be machine-dried.

Follow care label instructions

Suitable for machine drying

Not suitable for machine drying

Attention

Items treated with flammable cleaning and 
solvent agents (benzene, alcohol, stain 
remover etc.) must not be dried in this dryer. 
Fire could result. Only dry fabrics that have 
been washed in water!

The more moisture has been extracted from 
the laundry prior to drying, the more 
economic the drying process. 
Follow spinning recommendations.

Sort the load according to type of fabric (see 
care label) and the desired degree of drying. 
Fasten zips and loose straps etc. link.

For continuous washing and drying, these 
instructions must be followed before 
commencing the washing programme.

Max. load

Cotton / 
Coloured cotton

max. 2.5 kg (dry weight)

Synthetics

max. 2.0 kg (dry weight)

Note:
Laundry loads larger than the stated values 
must be split prior to drying or the drying 
result will be unsatisfactory

.

Drying programmes

Your time-controlled washer-dryer will stop 
the drying process after the set drying time 
has elapsed.

You will find the settable drying times around 
the drying programme selector knob. 
Correct choice of drying time will ensure that 
the desired degree of drying is achieved.

Re-drying: if the laundry or individual items 
appear too damp, re-drying is an option.
Reload the laundry, close the door and set the 
programme selector knob clockwise to the 
desired after-drying time (at least 20 minutes). 
The last 10 minutes are a cooling phase.

DRYING - GENERAL INFORMATION

DRYING - PREPARING THE LAUNDRY

DRYING - DRYING PROGRAMMES

Содержание wt 1530






















Отзывы: