23
First Wash Cycle
Precautions and General Recommendations
1.Packing
•
The packaging materials are
100% recyclable and bear the
recycling symbol
. Adhere
to local regulations when
disposing of packaging
material.
2.Energy saving tips
•
Achieve the best use of energy,
water, detergent and time by
using the recommended
maximum load size.
•
Do not exceed the detergent
dosages indicated in the
manufacturer’s instructions.
•
The Eco Ball - a special system
in the outlet - will prevent
detergent loss from the drum
to avoid detergent loss into
the environment.
•
Use “Prewash” for heavily
soiled laundry only! Save
detergent, time, water and
energy consumption by not
selecting “Prewash” for slightly
to normally soiled laundry.
•
Pretreat stains with stain
remover or soak dried in stains
in water before washing to
reduce the necessity of a hot
wash program.
•
Save energy by using a 60° C
instead of a 90° C wash
programme or a 40° C instead
of a 60° C wash programme.
•
Save energy and time by
selecting a high spin speed to
reduce the water content in
laundry before using a tumble
dryer (for machines with
adjustable spin speed).
3.Disposing of packaging
and old washing machines
•
The washing machine is built
from reusable materials. The
washing machine must be
disposed of in compliance with
current local waste disposal
regulations.
•
Before scrapping, cut off the
power cable so that the
washing machine cannot be
connected to the mains.
•
Remove detergent from
compartment if you intend
scrapping your washing
machine.
4.Child safety
•
Children must not be allowed
to play with or in the washing
machine.
5.General recommendations
•
Do not leave the washing
machine connected when not
in use. Turn off the tap.
•
Before cleaning or carrying out
maintenance switch off the
washing machine and
disconnect it from the mains
supply.
•
To clean the outside of the
washing machine, use a neutral
detergent and a damp cloth.
•
Do not use abrasive detergents.
•
Do not attempt to force the lid
open.
•
If necessary, the power cable
may be replaced with an
identical one obtained from
our After-Sales Service. The
power cable must only be
replaced by a qualified
technician.
6.EC Declaration of
Conformity
•
This washing machine has
been designed, constructed
and distributed in compliance
with the safety requirements
of EC Directives:
73/23/EEC Low Voltage
Directive
89/336/EEC EMC Directive
93/68/EEC CE Marking
Directive
.
We recommend that the first
wash cycle be carried out
empty. This will remove any
residual water used in the
factory checks.
1.
Turn on the tap.
2.
Close the drum flaps.
3.
Pour a small amount of
detergent (about 30 ml) into
the detergent dispenser
.
4.
Select a short programme
(see programme chart).
5.
Press the
“On/Off”
button.
