34
Water stop fault
(depending on model).
(The pump operates).
The “Water Stop” fault may
have been triggered by:
•
Too much foam.
•
A leak in the inlet hose or in
the washing machine.
Switch the washing machine off
by pressing the
“On/Off”
button, unplug the washing
machine and turn off the water
tap.
Tilt the washing machine
forwards carefully to allow the
water to evacuate from the
bottom tray.
Reconnect the washing machine.
Turn on water supply (if
“On/Off”
button is not pressed, but the
machine begins to fill, turn off the
water supply tap and contact
After-Sales Service).
Reselect the desired programme,
add detergent, if necessary, and
press the
“On/Off”
button to
restart the programme.
If the fault occurs again, contact
After-Sales Service
(see “After-Sales Service”).
After-Sales Service
Before contacting
After-Sales Service:
1.
Try to remedy the problem
yourself (see “Troubleshooting
Guide”).
2.
Restart the programme to
check whether the problem
has solved itself.
3.
If the machine continues to
function incorrectly, call
After-Sales Service.
Specify:
•
Your full address.
•
Your telephone number and
area code.
•
The nature of the problem.
•
The exact model of the
washing machine.
•
The service code (number after
the word SERVICE).
The After-Sales Service
sticker is in the lid of the
foreign body trap or on
the rear of the machine.
As a priority, you should
contact the After-Sales Service
of the retailer who supplied
you with the appliance.
