Bauknecht WA 43510 Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 23

Bauknecht WA 43510 Скачать руководство пользователя страница 19

37

For models with no fault display,
the washing machine stops in the
appropriate programme step.
First switch the washing machine
off and on again to continue
with the programme.
If the fault persists, please contact
After Sales Service (see “After
Sales Service”).

d.

“Water Stop” fault

(if

fitted)

The “Water Stop” fault may have
been triggered by:

1.

Excess foaming.

2.

A leak in the washing machine.

In this case the pump is switched
on automatically in order to
pump the water out.
For models with a fault display,
the “Water Stop” display lights
up, an acoustic signal sounds and
the spin speed indicator lights
flash. If a digital display is fitted,
“A” and “F” are also displayed
alternately.
For models with no fault display,
the washing machine stops in the
appropriate programme step.
Switch the appliance off, pull out
the mains plug and turn the
water tap off.
Tilt the appliance forwards
carefully to allow the collected
water to flow out from the
bottom of the appliance.

Then:

1.

Plug in the appliance.

2.

Turn the water tap on (if water
immediately flows into the
appliance again, without the
appliance being started, there is
a fault. Turn off the tap and
notify After Sales Service).

3.

For models with fault display,
select and start the desired
programme again.
For models with no fault
display, continue the
programme by pressing the
“On/Off” button again.

If the fault occurs again, please
contact After Sales Service (see
“After Sales Service”).

“Water Stop” fault, when
the programme selector is
in the “

“position.

The pump is switched on
automatically in order to pump
the water out.
For models with fault display the
washing machine will also detect
a Water Stop fault (leak) if the
programme selector is in the
“

“position. In this case an

acoustic signal sounds and the
digital display (if fitted) displays
“A” and “F” alternately.
For models with no fault display,
the “Water Stop” fault is
detected when the appliance is
switched on again.
Pull the mains plug out and
ensure that the water tap is
turned off.
Tilt the appliance forwards
carefully to allow the collected
water to flow out.

Then:

1.

Plug in the appliance.

2.

Turn the water tap on (if water
immediately flows into the
appliance again, without the
appliance being started, there
is a fault. Turn the tap off and
notify After Sales Service).

«
...
17
18
19
20
21
...
»

Содержание WA 43510
























Отзывы:

Нет отзывов