BAUKER SBC30, Оригинальное руководство пользователя

Страница: 4 / 44

EN-4
11. Transport, handling and storage of the unit
a) Switch off the engine when you cross roads or gravel paths.
b) Always clean and maintain before storing, pay special attention
to the guards and cutting attachments.
c) Before transporting the unit in a vehicle - stop the engine and
allow it to cool. Empty the fuel tank and securely locate the unit.
d) When removing the tool from a vehicle or from storage, be
careful not to drop the engine on the ground as this may
severely damage the fuel tank.
e) Never drag the tool across the ground, or throw it to the
ground - this is highly dangerous and will damage the fuel tank,
causing the fuel to leak, possibly causing fire.
f) Remember when moving the equipment to lift it the entirely
from the ground.
12. Start and commissioning of the unit
a) For units with a clutch, check that the cutting attachments stop
turning when the engine is at idles speed.
b) Read instructions on filling of fuel and oil, especially concerning
fire precautions and to carburetor adjustment section.
c) Always switch off the engine and allow it to cool before making
any adjustments
d) Make sure all guards, straps, debris shield and handles are
properly and securely attached.
13. Injuries by rotating parts
Do not touch rotating or moving parts until they have come to a
complete stop.
Do not remove wrapped twigs or other debris from moving or
rotating parts when the engine is running. Switch off the engine
before attempting maintenance.
14. Transport, handling and storage of the unit
Cleaning and maintenance before storage and transport,
including the use of guards on cutting attachments.
15. Maintain a firm grip, with thumbs and fingers
encircling the handles, with both hands on the
handles and position your body and arm to allow
you to resist kickback forces.
Kickback forces can be
controlled by the operator, if proper precautions are taken.
16. Look around the engine for signs of oil or petrol.
Wipe up any spills before starting the engine.