BAUKER SBC30, Оригинальное руководство пользователя

Страница: 36 / 44

EN-36
Brush Cutter
WARNING!
To avoid hazards never cut heavier weeds, brush and similar vegetation
with a thickness of over 20mm. Avoid contact with stones, wire, glass etc. that may cause
injury to the user! Inspect the blade regularly for damage, cracks or breaks! Always
replace a damaged blade!
WARNING!
When working with the cutter blade there is always a risk of kickback if the
cutting head comes into contact with a hard object! Kickback will cause the sudden stalling
of the cutting head, which in turn results in the cutting head being forced in the opposite
direction to the rotation of the cutter blade! Ensure that you retain a firm grip with both
hands at any sign of such kickback, pay attention and retain a firm stance to avoid injuries!
a) Use the cutting blade and guard to cut weeds, brush, small trees and similar vegetation
with a thickness of up to 20mm.
b) Never hold the unit higher than your hip. Work cautiously. The higher you hold the unit
the bigger is the risk of thrown objects or clippings. (See Fig. N)
c) Plunge the blade from above when cutting rank growth a undergrowth.
d) Move the blade close over the ground to cut young trees or grass.
Grass Trimmer
Note:
Remove the line cutter protector before using the grass trimmer. (See Fig. O1)
a) Use the trimmer head and trimming guard to cut small weeds, grass or similar soft
vegetation.
b) Hold the product with sufficient distance to your body.
c) Pay attention to your posture. Stand upright, do not lean forward.
d) Hold the trimmer head just above the ground at an angle of about 30°. (See Fig. O2)
e) Move the product with slow and regular horizontal movements from the right to the left
and then lead it back to starting point before trimming the next row. (See Fig. O3)
f) Clean the cutting means regularly. Stop the engine, switch the petrol brush cutter off and
unplug the spark plug connector before checking.
g) Trim in steps when the grass is very high. Do not cut the total height in once. (See Fig. O4)
TIPS (See Fig. O5)
a) For best results, do not cut wet grass because it tends to stick to the cutting means and
guard, prevents proper discharge of grass clippings, and could cause you to slip and fall.
b) Pay special attention when performing the work close to trees and bushes. The cutting
means can damage sensitive bark, and damage fence posts.
Pole Hedge Trimmer
Note:
Remove the blade protection sheath before using the pole hedge
trimmer. (See Fig. P1)