10
After Sales Support
Telephone:
1300 886 649
Email:
Before first use
•
Unpack the product but keep all packaging materials until you have made sure your new
3G Smartphone is undamaged and in good working order. Plastic wrapping can be a
suffocation hazard for babies and young children, so ensure all packaging materials are
out of their reach.
•
Unwind the USB cable and battery charging adaptor and inspect them for damage. Do
not use the cables or the charger if any part is damaged. In case of damage, contact
our after sales support line for advice on examination, repair or return of the damaged
product
•
Read this manual to familiarise yourself with all the features and operating principles
of your new 3G Smartphone. Pay particular attention to the safety instructions on the
previous pages.
Inserting the SIM card(s) and battery
•
Place you finger in the small recess in the corner of the mobile phone and with you
fingernail, carefully prise it open and lift off the back cover.
•
If the battery is in place, remove it.
•
Insert your SIM card(s) into the dedicated bays. Bay number (1) supports GSM and
WCDMA; bay number (2) supports GSM only. If required, insert a micro SD card into its
dedicated space.
•
Once the SIM and SD cards are securely in place, insert the battery (supplied) into the
phone, making sure to align the pins with the contacts.
•
Reinstall the back cover. It will lock into place.
NOTE:
Some SIM cards require a PIN number to be entered before use (see page 14
for
details). This PIN may be printed on the SIM card packaging, or you may have to
contact your service provider for the number.
Charging
The battery has been partially charged at the factory. To perform all functions, we recommend
you fully recharge it as follows:
•
To charge the device with the battery charger
, plug the large end of the USB cable into
the charging adaptor and the smaller end into the micro USB port on the 3G Smartphone.
Plug the charger into your mains power supply.
•
To charge the device using the USB cable and computer
, plug the large end of the
USB cable into a USB port on your computer and the smaller end into the micro USB
port on the 3G Smartphone. Ensure your computer is turned on.
Getting Started
