Bauer RAINSTAR A1 Скачать руководство пользователя страница 22 | Manualshive

Страница: 22 / 35

Bauer RAINSTAR A1 Скачать руководство пользователя страница 22

Manual for

BAUER RAINSTAR A1, A2

18

6 QUICK STOP

The PE-pipe retraction can be stopped immediately by
actuating the shut-off frame or the gear shifting lever. Thereby
the gearbox is disengaged.
Pull up the brake locking lever (1) to avoid slackening of the
PE-pipe. Then slacken the PE-pipe slowly by pulling the brake
lever (2).

7 WINDING MECHANISM

The  winding  mechanism  operates  synchronously  with  the
winding or unwinding of the PE-pipe. Starting from the reel, it
is operated through a chain and the helically grooved spindle
that  transports  the  winding  carriage  of  the  PE-pipe.  The
winding  mechanism  ensures  that  the  PE-pipe  is  guided
properly winding for winding. When you put the machine into
operation  for  the  first  time,  pull  off  the  full  length  of  the  PE-
pipe  to  let  it  take  a  circular  shape  under  pressure  and
eliminate  ovality.  This  step  is  essential  for  trouble-free
operation of the winding mechanism.

8 SHUT-OFF AND SAFETY EQUIPMENT

Unattended operation of the RAINSTAR A1, A2 is ensured by
a final- and safety shut-off device. The final shut-off device is
actuated when the cart lift actuates the gearbox shut-off lever
stopping thus the drive. To avoid troubles caused by faulty
windings of the PE-pipe on the reel, the shut-off device also is
activated by the shut-off frame when faulty pipe windings build
up on the reel.

2

1

«
...
20
21
22
23
24
...
»

Содержание RAINSTAR A1




































Отзывы:

Нет отзывов