Bauer RAINSTAR A1 Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 35

Bauer RAINSTAR A1 Скачать руководство пользователя страница 10

Manual for

BAUER RAINSTAR A1, A2

6

4.

WARNING!

Safety covers must not be removed during operation.
For repairs, make sure that the reel of the RAINSTAR A1, A2 cannot move.
Slacken the PE pipe.

5.

WARNING!

Do not stay at rear of the RAINSTAR A1, A2 !
Operator is in danger of being crushed by the retracted sprinkler cart. Keep
the distance !

GENERAL

BAUER products are designed and manufactured carefully, subject to a system of continuous quality
control. The BAUER RAINSTAR A1, A2 is a turbine-driven machine designed for fully mechanised and
labour-saving irrigation.

The BAUER RAINSTAR A1, A2 is a universal machine suitable of covering fields of varying lengths and
widths. There is no need for supervision while the system is operating.

Strict  observance  of  all  operating  and  service  instructions  in  this  manual  is  the  basic  prerequisite  for
many years of trouble-free operation. Therefore please make sure that all operators on your staff are
familiar with the instructions given in this manual.

The  model  number  as  well  as  the  serial  number  (Vehicle  identification  number)  are stamped into the
nameplate.  In addition, the serial number is stamped into the frame of the undercarriage.  Please state
these data in all your inquiries, correspondence, warranty matters and parts orders.

We warrant according to our General Terms of Sale.

«
...
8
9
10
11
12
...
»

Содержание RAINSTAR A1




































Отзывы:

Нет отзывов