Bauer RAINSTAR A1 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 35

Bauer RAINSTAR A1 Скачать руководство пользователя страница 2

Manual for

BAUER RAINSTAR A1, A2

II

Introduction

Thank you for buying BAUER RAINSTAR A1, A2 !

The present manual is a very important document that describes how to operate the

BAUER

RAINSTAR A1, A2

.

This manual describes the system as detailed as possible. If you need still more information, please
contact your dealer or turn directly to

BAUER

in Voitsberg/Austria.

Please note that the content of this manual neither constitutes part of nor alters in any way any
previous or existing agreement, promise or legal relationship.

BAUER

’s

commitment is based solely

on the respective purchase contract which also contains the complete and only valid warranty
agreement. Said contractual warranty is neither extended nor limited by the content of this manual.

All information contained in the present manual is based on the latest product details available at the
time of printing.

BAUER

reserves the right to change without notice without assuming any liability!

BAUER RAINSTAR A1, A2

is designed for highest performance safety and reliability provided it is

operated in accordance with the present operating instructions.
Therefore you should study this manual thoroughly before starting your

BAUER RAINSTAR A1, A2

!

Strictly observe all instructions pertaining to system handling, operation and service!
On this condition,

BAUER RAINSTAR A1, A2

will operate to your satisfaction for many years!

Non-observance of this manual may cause personal injury or damage the equipment!

Please make this manual available to your staff. State the type and serial number of your

BAUER RAINSTAR A1, A2

in all inquiries, correspondence, warranty problems, or parts orders.

We wish you a lot of success with BAUER RAINSTAR A1, A2 !

This manual is to be considered an integral part of

BAUER RAINSTAR A1, A2

. Suppliers of both new

and used systems are advised to put down in writing that they delivered the manual together with the
system.

«
1
2
3
4
...
»

Содержание RAINSTAR A1




































Отзывы:

Нет отзывов