background image

Page 13

For technical questions, please call 1-888-866-5797.

Item 59365 

        

Sa

Fety

Opera

ti

O

n

Maintenance

Setup

Maintenance and Servicing

  procedures not specifically explained in this manual must 

be performed only by a qualified technician.

tO preVent SeriOuS inJury FrOM acciDentaL OperatiOn: 

Make sure that the On/OFF Switch is in the off-position and remove the 

Battery pack before performing any procedure in this section.

tO preVent SeriOuS inJury FrOM tOOL FaiLure: 

Do not use damaged equipment.  if abnormal noise or vibration occurs, 

have the problem corrected before further use.

cleaning, Maintenance, and Lubrication

1. 

BeFOre eacH uSe,

 inspect the general 

condition of the tool.  Check for:
•  leaking, swollen, or cracked battery pack 
•  loose hardware
•  misalignment or binding of moving parts
•  cracked or broken parts 
•  damaged electrical wiring
•  any other condition that may 

affect its safe operation.

2. 

aFter uSe,

 wipe external surfaces 

of the tool with clean cloth.

3. 

periODicaLLy,

 wear ANSI‑approved 

safety goggles and NIOSH‑approved 

breathing protection and blow dust and grit out 

of the motor vents using dry compressed air.

4. 

Li-ion Battery MuSt Be recycLeD Or 

DiSpOSeD OF prOperLy.

 

Do not short, incinerate or open battery.

5.  Disconnect battery pack and store battery pack, 

charger, and tool in dry, indoor area out of 

reach of children and away from metal objects 

(i.e., paperclips, coins) to prevent shorting.

accessory Storage and Handling

1.  Handle accessories carefully to prevent 

dropping or bumping.  Do not use wheels 

that have been dropped or bumped.

2.  Store accessories in shelves, racks, boxes, or 

drawers.  Keep storage area dry and above 

freezing.  Any cut‑off wheels exposed to humidity 

or freezing temperatures must not be used.

Содержание 2269C-B

















Отзывы: