Page 13
For technical questions, please call 1-888-866-5797.
Item 57180
S
AFE
ty
Op
ERA
ti
O
n
M
A
int
E
n
A
nc
E
S
E
t
U
p
clearing a Jam
1. If the LED Indicator is flashing red, it indicates
there is a jam in the Magazine. Stop and
clear the jam before proceeding.
2. Remove the Battery Pack.
3. Open the Magazine by pressing the
release Latch and sliding it open.
Latch
4. Remove the nail strip and jammed fastener.
Jam
5. Reinstall the nail strip and Battery Pack. Close
the Magazine. If the jam has been corrected,
the LED Indicator will no longer be illuminated.
If the LED is still flashing then the jam may
be in the internal striking mechanism.
6. Remove the Battery Pack and nail strip.
7. Using the included 3mm Hex Key, remove the
four crews located next to the Depth Knob.
Hex Key
Depth
Knob
Drive
Guide
8. Remove the Drive Guide and jammed fastener.
9. Reattach the Drive Guide with the four
screws. Use the Hex Key to tighten.
10. Make sure the Workpiece Contact
moves smoothly without binding.
11. Reinstall the Battery Pack and nail
strip. Check that the LED Indicator is not
illuminated. If the LED is still flashing, have
the tool serviced by a trained technician.
