Final installation
1. Place the hot tub in its desired final position.
2. Adjust the feet of the bathtub until it is completely horizontal.
3. Seal all joints between the bathtub and the wall with silicone.
4. Install the headrest.
Care and maintenance
1. We recommend using a soft cloth and neutral detergent for daily cleaning.of your hot
tub. Please do not use cleaners containing acetone or ammonia. Under no
circumstances should cleaners be used that contain formic acid or formaldehyde to
disinfect your bathtub hydromassage. Ozone disinfection kills all germs and bacteria
with the simple push of a button.
2. Lime deposits on the surface can be removed with specific products.
3. If the suction nozzles or jets become clogged due to hair or similar locks can be
unscrewed and cleaned.
Please use the appropriate tools to open the package.
Security advice
1. Children and people in need of care should not bathe withoutsupervision. People with
heart problems,
high blood pressureor diabetes, as well as other serious illnesses, should only use the
bathtubhydromassage
after consulting a doctor.
2. People with heart disease or high blood pressure are advised notuse the hot tub.
3. Alcohol consumption or particularly high physical fatigue can be aThreat when using
the hot tub.
4. In order to avoid damage to the product, clean the hot tub with asoft cloth and mild
soap.
5. Do not use acidic or alkaline cleaners.
6. Be careful not to slip when entering and exiting the hot tub.
7. Be aware that the bathtub floor may be more slippery due to the remains of soap and
other products.
8. We recommend that you hire a specialized company to carry out theconnection of
water pipes.
9. All electrical connections of the hot tub must be brought tocarried out by a specialized
company. If the power cord is damaged, pleasePlease ask a specialist to replace it.
10. The electrical installation requires grounding. Cable diameter noit must be less than
2.5 mm.
11. The water pump has a protection sensor that prevents it from startingdry running and
can only be started once water reaches the sensorsof level.
12. It is recommended not to completely surround the hot tub withtiles. The water pump,
air pump and ozone disinfection requireair circulation.
Customer Service: 800-500-9895
bathselect.com
3
