USER MANUAL BATMODE 2S/2S+ SYSTEM
42
To send a status SMS a sufficient SIM card balance or adequate mobile tariff is
resumed. Furthermore, the system has to be installed in an area with sufficient mobile
network coverage.
Table 11: Meaning of the acronyms used in status SMS
Acronym Meaning
ID
ID of the system defined with Prefix. The value is also prefixed in the filenames
of the record files.
MON
Current status of the monitoring. If monitoring is running, the time periods (e.g.,
"16: 00-09: 00") or the relative minutes with respect to sunrise and sunset (e.g.
"-10/40") are sent. If no time periods are set, the status is set as "ungated".
LRL
Last recorded reference value of the microphone played by the test signal
speaker. In brackets deviation from the calibration value.
LRD
Recording date of the last reference value.
LFD
Recording date of the last record.
FL24
Number of records in the last 24 hours.
FT
Total number of records in monitoring directory.
FC
Free disc space on drive C in GB.
FD
Free disc space on drive D in GB.
SL
Current mobile signal level in %. If a connection to the mobile network cannot
be established, the following error messages are possible:
MNA
: Modem not available
MTO
: Modem turned off
LOS
: SIM locked
NOS
: No SIM detected
NAS
: SIM account not active
WWW
Status of Internet connection. The following messages are possible:
Off
: System is offline
LAN
: System is online via a LAN connection
E
: System is online via mobile connection, current data type is EDGE
G
: System is online via mobile connection, current data type is GPRS
3G
: System is online via mobile connection, current data type is UMTS
H
: System is online via mobile connection, current data type is HSDPA
4G
: System is online via mobile connection, current data type is LTE
WIFI
Status of WIFI-Hotspot.
CC
Current Prepaid Credit
To adjust the used Short Message Service Centre (SMSC) number and the Unstructured Supplementary
Service Data (USSD) code for prepaid credit query, open the Advanced SMS Settings dialog (see Figure
29) by pressing the <
Advanced SMS/USSD Settings
> button.
