USER MANUAL BATMODE 2S/2S+ SYSTEM
41
4.2.2
Page: Connectivity
On page <
Connectivity
>, you can configure all settings, which are relevant to monitor the BATmode
system remotely.
Figure 28: Connectivity Page
4.2.2.1
<Daily Status SMS> Box
The BATmode system can send daily status messages via SMS to you at a specified time. If you wish to
receive the daily messages, check the box <
Daily Status SMS
>
and enter the desired
receiver’s number
in international format (for example, +49160123456) at <
Receiver Number(s)
>. If multiple receivers
are desired, enter several numbers separated by ";". Transmission time is set via the <
Send time
> input
fields. Two different SMS formats are available and can be chosen by the radio buttons <H
uman
Readable
> and <
Comma Separated Values
>. While the human-readable format allows for a manual
message evaluation, the CSV (comma-separated values) format is intended to be used with
spreadsheet analysis tools or databases. You can send a test message to the specified number(s) by
pressing <
Send Test SMS
>. The content of the messages is composed of current status values of the
BATmode system. In the human-readable format corresponding acronyms are prefixed to the
respective values. Table 11 lists the used acronyms and respective descriptions. By choosing the CSV
format values are separated only with semicolons and acronyms are used any longer. A slash character
("/") separates values of different microphone channels or measurement points.
To always comply with the maximum character number of 160 characters per SMS, status SMS may be
subdivided into two individual messages if required.
