Bastl Instruments KASTLE v1.3, Инструкция по сборке

Страница: 13 / 16

Mount the holder with
​ spacer
and the longer
​ screw ​
. It may be a little tricky. Don’t tighten the screw
too ​ ​ much ​ ​ because ​ ​ you ​ ​ are ​ ​ dealing ​ ​ with ​ ​ plastic ​ ​ material, ​ ​ you ​ ​ know.
And now the last soldering challenge! You have to connect the leads with the lugs. ​ Do not let the lug
heat too much! (it would break the connection of the coil and the lug) Use just the tip of your
soldering ​ ​ iron.
YOU ​ ​ ARE ​ ​ ALMOST ​ ​ DONE...
Unmount ​ ​ the ​ ​ washer ​ ​ and ​ ​ nuts ​ ​ from ​ ​ the ​ ​ switch. ​ ​ Keep ​ ​ them ​ ​ aside.
13