manualshive.com logo in svg

Basler DGC-500, Инструкция по эксплуатации, Страница: 92 / 154

Поделиться
Скачать
Basler DGC-500 Скачать руководство пользователя страница 92

Opening Settings Files 

To open a DGC-500 settings file, click the 

Open Settings File

 button or click 

File

 on the menu bar and 

click 

Open

. An Open dialog box will appear and enable you to select a DGC-500 settings file (DG5 

extension) for retrieval into BESTCOMS.  

RS-232 CONFIGURATION 

When communication is established between a PC and DGC-500, changes in BESTCOMS to the 
communication configuration settings affect both the PC and DGC-500. When communication between a 
PC and DGC-500 is closed, changes in BESTCOMS to the communication configuration settings affect 
only the PC. 

The communication configuration settings are 
viewed and adjusted through the Communications 
Configure dialog box. This dialog box is accessed 
by clicking 

Configure

 on the menu bar and clicking 

RS232

. The Communications Configure dialog box 

settings are illustrated in Figure 4-26 and described 
in the following paragraphs. 

Baud Rate.

  This setting selects the communication 

rate. A baud rate of 1200,  2400, or 9600 can be 
selected. 

Parity.

 

This setting enables and disables 

summation checking of data transmitted between 
the PC and DGC-500. A setting of No Parity, Odd 
Parity, or Even Parity can be selected. 

Unit ID.

  This setting allows an identification number to be assigned to a DGC-500 for polled 

communication. A number between 1 and 247 may be used. 

ENGINE CONTROL UNIT (ECU) INTERFACE 

For J1939 applications, the interface between the DGC-500 and ECU is configurable. First, the output 
contact used to power up the ECU (for non-continuously powered ECU applications) is selectable. 
Second, periodic communication with the ECU (also referred to as pulsing the ECU) may be disabled if 
the application requires it. Third, the timers associated with pulsing the ECU are programmable. The 
settings used to configure the ECU interface are adjusted through the ECU Control dialog box. This dialog 
box is accessed by clicking 

Configure

  on the menu bar and clicking 

ECU Control

. The ECU interface 

settings of the ECU Control dialog box are shown in Figure 4-27 and described below.  

ECU Contact Control –  Output Select.

  This 

setting selects the DGC-500 output that is used 
to power up the ECU in J1939 applications 
where the ECU is not continuously powered. If 
the pre-start contact is selected, the fuel contact 
will still close during cranking and running of the 
genset to provide a separate indication that the 
genset is running. 

ECU Contact Control –  Pulsing.

  In J1939 

applications where the ECU is not continuously 
powered, the DGC-500 will normally pulse the 
ECU periodically to update its engine monitoring 
data. For applications where this periodic 
pulsing is not desired, this setting allows the 
pulsing feature to be disabled. 

ECU Related Time Values – Engine Shut Down 
(Sec.).

 When going from Running to Shut Down, 

this setting adjusts the length of time that the 
DGC-500 stays disconnected from the ECU 
before starting the first pulse. The Engine Shut 
Down setting range is 1 to 60 seconds. 

Figure 4-26. Communications 

Configure Dialog Box 

Figure 4-27. ECU Control Dialog Box 

4-24 

DGC-500 BESTCOMS Software 

9355400990 Rev H 

Содержание DGC-500



























































































































































Отзывы:

Нет отзывов