Basler ace acA1920-155, Руководство пользователя, Страница: 320 / 326

Revision History AW00123404000
310 Basler ace USB 3.0
cont’d
Removed pixel formats RGB 8 and BGR 8 from Table 4 on page 7 .
Modified the sensor size for the acA1600-20um in Section 1.2 on page 2 .
Removed the availability of CS-mounts for acA1920-20um/uc cameras in
Section 1.2 on page 2 and added a related note in Section 1.4.1 on
page 26 .
Indicated UL certification for cameras in Section 1.2 on page 2 .
Added a note about the availability of CE conformity declarations to the
tables in Section 1.2 on page 2 .
Added information about the availability of pylon for Linux in Section 1.2 on
page 2 .
Added information about mechanical stress tests in Section 1.6 on page 33 .
Added max. ambient temperature (UL 60950-1) in Section 1.9.1 on
page 36 .
Added information in Section 2 on page 41 and Section 6.10 on page 165
about restricted initial maximum allowed acquisition frame rates for
acA2000-165u and acA2040-90u cameras.
Added an explanation about the pylon Viewer’s significance for the camera
configuration mechanism in Section 3.1.1 on page 44
Modified the descriptions of voltage requirements in Section 5.7.1 on
page 57 , Section 5.8.1 on page 60 , Section 5.9.2 on page 65 , and
Section 5.9.3 on page 67 .
Added a note about the occurrence of a frame acquisition when enabling or
disabling the inverter in Section 5.11.3 on
page 79 and Section 5.12.5 on
page 87 .
Added a note in Section 5.12.6.1 on page 88 about the triggering of Timer 1
in the absence of a flash window start signal.
Revised Section 5.13 on page 90 .
Added trigger sources for the frame start trigger in Section 6.4.1.2 on
page 113 .
Added in Section 6.6.2 on page 132 a note about the unavailability of the
flash window signal in ERS mode when very short exposure times are
used.
Updated the maximum allowed gain settings for acA3800-14u and
acA4600-10u cameras in Table 34 on page 196 .
Added Section 8.6 on page 214 describing the sequencer feature.
Added a section about the effective image ROI in Section 8.7.4 on
page 247 .
Added a note about the unavailability of vertical and horizontal binning by 3
for acA3800-14um cameras in Section 8.7.1 on
page 243 .
Added a note about checking ROI settings when changing a binning
parameter value in Section 8.7.4 on
page 247 .
Highlighted the distinction between "active set" and "active user set" in
Section 8.17 on
page 288 .
Added the Line Status All chunk as Section 8.18.3.2 on page 297 .
Doc. ID Number Date Changes