Bask Mistmaster
®
3-in-1 Compact Misting System: Mist Station Kit Instructions
v.210119
Page
10
of
20
Cut and Connect Tubing with your Mistmaster in its stationary location
6.
On your Mistmaster, rotate the Selector (9) to the Auxiliary Output (11)
position with the Selector’s arrow pointing
down and the Auxiliary Output (11) exposed.
7.
Connect the Mist Station’s Quick
Disconnect (D) to your Mistmaster device by pulling back on the sleeve while
pushing the body onto the Auxiliary Output
(11) on your Mistmaster’s Control Panel
(10). While pushing in firmly,
release the sleeve around the opening of the Quick Disconnect (D) so it locks into place. Pull gently on the
body
to
assure the connection is secure.
Typical Mist Station Configuration with Four Risers
The illustration above shows a typical installation of a Riser Kit with each Riser spaced approximately 8 to 10
feet (~2.4 to 3.1 meters) apart. You can adjust the positions of the Risers to fit your treatment area. If you wish
to treat a larger space, visit
to purchase additional Risers and Tubing and customize
your configuration.
You can also add Overhead Mist Nozzle as described later in these instructions. When you are satisfied with the
configuration of your Mist Station, continue to the
Cut and Connect Tubing
instructions. The illustrations below
provide details for each type of Riser.
Slim Riser Configuration
Ultra-Slim Riser Configuration
