base engineering FWG09, Руководство по сборке

Страница: 10 / 26

FWG09I Assembly instructions
10
In the service menu and when the alarm is triggered on the device, both speakers are used, even if
“Off” is set here.
Microphone is...
This setting changes the sensitivity of the microphone during voice communication. This setting
should only be changed after consultation with base engineering gmbh.
“Press longer announcement” is...

On (default setting) – An announcement is made if any of the alarm buttons is pressed too
briefly.

Off – A short press on the alarm buttons is ignored.
Trunk line seizure is…

Automatically (default setting) — The FWG09 automatically detects if it is connected to a
public phone line or a private PABX.

0 with pause – A “0” is dialed before each telephone number. A pause of 1/2 seconds is
inserted after the “0”.

0 without pause – A “0” is dialed before each telephone number. The entire number
including “0” is dialed in a row without a break.

Blind dial – All telephone numbers are dialed “blindly”, there is no check whether or not an
office is available.

9 with pause – A “9” is dialed before each telephone number. A pause of 1/2 seconds is
included after the “9”.

9 without pause – A “9” is dialed before each telephone number. The entire number
including "9" is dialed in a row without a pause.
When dialing blindly, a dial tone is expected after 2 seconds.
This setting should only be changed after consultation with base engineering gmbh. This is only
necessary if a correct configuration of the telephone system is not possible.
To use the FWG in gate keeper mode connected to a GSM13 set this to “ Blind dial ”.
International prefix code is…

Off – All numbers are dialed without prefix.

On – The call center numbers are dialed with their matching prefix.

Germany – All dialed numbers are prefixed with 0049 for Germany.

Austria – All dialed numbers are prefixed with 0043 for Austria.

Poland – All dialed numbers are prefixed with 0048 for Poland.
This setting allows the use of the FWG09 in a different country than the call center, i.e. a roaming
SIM card. In the call center mode, the international prefix code is known to the FWG and is used with
"On". In gatekeeper mode this must be selected from the list of countries.
Messages to...

Call center – The FWG09 sends all messages to the preset call center.