Basalte Deseo Cresnet, Руководство пользователя

Страница: 8 / 17

Deseo Cresnet
Manual
8 / 17 v0.6 © 2020 basalte
3.6 Fan modes
In the configuration module it is possible to enable the following fan modes:
Off
– Low – Mid – High – Auto
When touching and releasing the fan sensor, the Deseo will cycle through the different fan modes if
they are enabled.
If the fan mode is changed by touching the fan sensor, the corresponding output join will be pulsed
high.
<
Fan_Low >
< Fan_Mid >
< Fan_High >
< Fan_Auto >
< Fan_Off >
All fan modes can also be changed from the Cresnet bus by sending a pulse to one of the
corresponding digital input joins.
< Fan_Low_FB >
< Fan_Mid_FB >
< Fan_High_FB >
< Fan_Auto_FB >
< Fan_Off_FB >
3.7 Temperature
Each Basalte Deseo keypad has a temperature sensor to report the ambient temperature on the
Cresnet bus. The temperature is reported in tenths of a degree Celsius or Fahrenheit on the analog
output
< Temperature_FB >.
The serial output
<Temperature_FB$>
will report the same value in “xx.x”
format for visualization.
When enabled, the temperature can be reported every 60 seconds, or on a temperature change of
0.5° Celsius. (equal to a temperature change of 0.9° Fahrenheit)
The report mode and temperature format are configured using the ‘ Basalte Deseo Configuration ’
module. A temperature compensation is available to anticipate on any environmental factors that
might disturb the temperature measurement.
3.8 Humidity
Each Basalte Deseo keypad has a humidity sensor to report the relative humidity on the Cresnet bus.
The humidity is reported on the analog output
< Internal_Humidity >
. The serial output
<Humidity$>
will
report the same value in “xx.x” format for visualization.
When enabled, the humidity can be reported every 60 seconds, or on a change of 1 %.
The report mode and temperature format are configured using the ‘ Basalte Deseo Configuration ’
module. A humidity compensation is available to anticipate on any environmental factors that might
disturb the humidity measurement.