Bartscher Silversteam-K 6110DRS, Руководство пользователя

Страница: 35 / 72

Operating Instruction
117262 33 / 70
EN
6.2 Thermal processing
Manual Thermal Processing
From the HOME screen page, by pressing the 'Manual' control field (A, Fig. 7), you
access the setting screen of thermal processing parameters.
In 'Manual' mode, the appliance can be set for individual thermal processing with
one or more phases and/or a thermal processing program can be set and saved in
the 'Recipes' list.
Setting Automatic Pre-Heating
The pre-heating function heats the
appliance to the desired temperature
before dishes to be thermally processing
are introduced.
If the appliance temperature is higher than
the one indicated for pre-heating the
appliance, it will automatically cool down to
the correct temperature.
'Pre-heating' is set automatically, but this
function can be modified after the 'Start'
key has been pressed, by pressing the
temperature displayed.
By pressing key 1 (Fig. 10) to the left or
right, this function may be enabled or
disabled.
NOTE: Automatic pre-heating must be
executed with empty oven chamber.
Fig. 10
Setting Thermal Processing Mode
Key 2 (Fig. 10) is factory-set as default to
Convection thermal processing mode. By
pressing this key, the thermal processing
mode may be changed to
Mixed or Steam .
Additionally, you may set the following
thermal processing modes:
Hold o r Smoking
(Fig. 11).
Fig. 11