Operating Instruction
117723
43 / 68
EN
Copying, Moving, Renaming, and Removing Thermal Processing Program
Each available thermal processing program may be copied, moved, renamed, or
removed fully or partly.
Copying Thermal Processing Program
If a new program is to be created on the basis of an already existing program
(because the old and new program share some thermal processing aspects), it may
be copied.
1. Select the group, in which the thermal processing program is to be saved, and
then enter the name.
2. Press Enter, to confirm.
3. Select the base thermal processing
program, open it and make changes
by pressing 'Advanced customisation'
(key 18, Fig. 23).
4. Execute the requested change.
5. In 'Functions' menu (20, Fig. 25),
select 'Save', and then 'Copy'.
6. Select the group in which the thermal
processing program is to be saved,
enter its name and press Enter, to
confirm.
Fig. 25
