- 37 -
5. Installation
5.1 Positioning
Before the operation unpack the device and remove all package material and
protective foil from the device and equipment.
CAUTION!
Never remove the rating plate and any warning signs from the device.
Place the device on top of an even, stable, dry, and water-resistant surface which
supports the weight of the device and is not heat sensitive.
Never
place the device on the flammable surfaces.
Do not
place the device in the vicinity of open fire, electric ovens, heating furnaces,
or other heat sources.
Never
place the device at the edge of a table to avoid accidents.
Never
place the device in humid or wet environment.
Place the device so that the plug is easily accessible and can be quickly removed
from its socket in case of necessity.
5.2 Electric connection
DANGER! Electric shock hazard!
The device can cause injuries due to improper installation!
Before installation and connecting the local power grid
specification should be compared with that of the device
(see rating plate). Connect the device only in case of
compliance!
The power supply circuit with the socket must be protected by the fuse of at least 16A.
Connect the device directly to a single grounded socket. Do not use any power bar or
multiple socket.
