- 39 -
Activation / deactivation of the device
The device is turned on/off by rotating the temperature controller. In position
the device is turned off.
To set the device in the
normal operation mode
position the temperature controller
to
or
. In position
water will be boiled as quickly as possible.
For the
interval boiling
rotate the temperature controller backwards until the control
light goes off. The device will maintain the water temperature of 95 °C - 100°C.
6.3 Operation
Water heating
CAUTION!
Make sure that the temperature controller is rotated to position
counterclockwise until the end.
Pour required amount of fresh water to the device (
only up to the maximum mark
).
WARNING! Burn hazard!
Overfilling of water tank may cause water splashing and
burns! Do not exceed the maximum filling level!
NOTE!
In order to reduce the heating phase time fill the tank with warm water.
In case of cold water the heating time is longer.
Place the lid on the tank and put the teapot on it.
Connect the device to appropriate single grounded socket.
