Bartscher FW500US, Руководство пользователя

Страница: 20 / 22

Cleaning
18 / 22 370238
EN
Appliance Disassembly
Prior cleaning, the appliance should be disassembled the following way:
– screw the locking ring off, turning it counter-clockwise and remove it,
– remove all components from the worm housing (perforated disk,
stainless steel knife, worm shaft),
– remove the pusher from the filling shaft,
– remove the grinder funnel from the worm housing,
– turn the locking ring counter-clockwise to screw the worm housing off,
– to end with, remove the worm housing from the appliance,
– remove residues of processed food products from the worm housing and
filling shaft.
NOTE: Clean the appliance directly after each use and do not let the
residues of food products to dry up on the housing nor any other
component of the meat grinder.
Cleaning of the Appliance and Accessories
1. Wash detachable stainless steel components with a mild cleaning agent. Use a
soft sponge or dish-washing brush for cleaning.
NOTE: All detachable stainless steel components are dishwasher-safe.
2. Residues of food products that dried up on the detachable components of the
appliance may be easily removed after soaking them for a while in warm water.
3. To end with, rinse the cleaned components in clean water and thoroughly dry.
4. Wipe the motor block and connection cable only with a slightly damp cloth.
Make sure that no liquid penetrates ventilation slots at the rear and bottom side
of the appliance.
5. Carefully dry the motor block.
6. Leave all cleaned components for approx. 1/2 hour to dry in open air.
7. Lubricate perforated disks, worm and stainless steel knife with a minute amount
of edible oil, to prevent them from rusting.