
- 36 -
Settings
NOTE!
Heat up the convection oven well before each use. Set the temperature about
30 °C higher than the specified one and correct it after charging the
convection oven, which will help you to achieve an even result.
Turn the device on by means of
main / time control knob
(rotate it clockwise to the
desired cooking time). Once you activate the knob, the
green operation control lamp
will illuminate and the interior lights as well as the fan motors will be turned on.
Set the desired temperature using the
temperature control knob
.
The
green heating control lamp
will illuminate. Once the set temperature is reached,
the green control lamp goes off and lights up again when the temperature in cooking
cavity decreases.
After reaching the set temperature, place the desired food in cooking cavity of
convection oven.
WARNING! Risk of burns!
Some parts of the device become very hot during operation.
Always open and close the convection oven with the help of door handle.
Use protective gloves when you operate the device.
There can be placed 4 baking trays in four slide rails of the convection oven at the
same time. When charging the device keep
at least 40 mm
distance between the
food and the baking tray above it, in order to maintain optimum heat distribution in
the cooking cavity.
After the preset time elapses a signal sounds, the green time setting lamp goes off
and the device automatically switches off.
Remove the cooked food.
If the device is no longer used, turn it off (set the
main / time control knob
and
temperature control knob
to the
"0"
position) and disconnect it from the power
supply (pull the plug!).
CAUTION!
The device is equipped with an
overheating protection device
, which trips at
320 °C and shuts down the device. If the overheating protection device has
tripped, let the device be cooled for some time and press the
RESET
button at
the rear of the device to bring it back into operation.