- 4 -
•
Remove the wall bracket from the soap dispenser and mark on
the wall holes to be drilled based on the holes in the wall
bracket at the desired height.
•
Drill 3 holes in the wall and insert the wall plugs connected to
the dispenser.
•
Screw the wall bracket to the wall with the attached screws and
then hang the soap dispenser on the bracket.
•
Make sure that the soap dispenser snaps into the wall bracket.
•
In conclusion, tighten the screw inside
the container.
Filling with soap / taking soap
•
Open the opening for filling the soap dispenser
and fill the container with liquid soap.
•
The minimum capacity is approximately 300 ml.
•
Press the pump at the front of the unit to dispense
soap as needed.
Cleaning
•
Clean the soap dispenser with a soft, damp cloth.
•
Never use harsh or abrasive cleaners that could scratch
the surface.
•
After washing use a soft, dry cloth to dry and polish the
surface.
Bartscher GmbH
Franz-Kleine-Str. 28
D-33154 Salzkotten
Tel.: +49 (0) 5258 971-0
Germany
Fax: +49 (0) 5258 971-120
Wall bracket
Opening for filling
Screw