- 49 -
Make sure that the blade is at one of the ends (right or left) of the cutting rail.
Extend the foil roll to the required length and place on the cutting rail.
Move the blade from one end to another in order to accurately and cleanly cut off
the vacuum bag.
Place the cut vacuum bag on the sealing strip up to the marked edge, and not
inside the vacuum chamber.
Close the front cover and firmly press the front handle to lock the cover.
You will hear a beep sound,
“READY“
indicator comes on and the device is ready
to perform this function.
Press the
“SEAL ONLY“
button to seal the vacuum bag. The progress of the
sealing process is shown on the digital display.
After the sealing is finished a beep sound is heard, and the
“COMPLETE“
indicator
comes on.
Lift the lid, open the front cover and remove the prepared vacuum bag from the
device.
Check both seals. It should have a uniform cross-section without any folds. In case of
incomplete sealing, cut off the seam and repeat the entire vacuum packaging
process.