- 37 -
Attention! Do not use any sharp instruments or other tools to mechanically
remove ice!
•
Remove the channel, turn it 180° and replace it in its original location.
•
Close the device’s door. Turn the deep freezer on, and wait for it to reach the
required temperature before placing food products back inside.
•
In case of an unforeseen power outage, do not open the door more than necessary
in order to prevent loss of cool air.
•
After a power outage or after the cable is removed from its plug, wait at least 15 min.
before connecting the deep freezer to a power source.
•
If the device is to remain unused, it should be turned off (set the temperature dial
to „0“ and remove the plug from its socket). Defrost the device in the manner
described above.
•
If the device is to remain unused for a longer period of time, leave its door open.
6. Cleaning and maintenance
6.1 Safety advice
o
Before beginning with repair or cleaning works make sure the device has been
disconnected from power supply.
o
Do not use any acid agents and make sure no water ingresses the device.
o
To protect yourself from electric shock, never immerse the device, its cables and
the plug in water or other liquids.
CAUTION!
The device is not suited for direct washing via water jets.
Therefore, you must not use any kind of pressure water jet for cleaning the device!
6.2 Cleaning
o
Clean the device regularly.
o
Protect the interior surface of the device and all plastic elements from grease, acids
and sauces. If they get dirtied, immediately wash the affected areas with warm water
and a mild cleaning agent.
o
Use warm water with a mild cleaning agent to wash the interior and exterior surface of
the device. After washing, rinse with clean water. Never use hot water to wash the
device!
o
Thoroughly wipe dry all washed surfaces.
