- 33 -
5. Remove the door from the device.
6. Unscrew the upper fastening (6). Be careful with the plastic plate under the
fastening.
7. Rotate the fastening (6) and plastic plate 180° then screw in at the two o penings
next to each other on the other side of the device.
8. Remove the lower shield panel (1).
9. Unscrew the fastening with (2) pin.
10. Unscrew the pin and washer from the fastening, then screw it into the opening at
the other side of the fastening.
11. Remove the fastening (7) and replace it with the fastening (2) with pin.
12. Place the fastening (7) in the previous location of the fastening (2).
13. Place the door on the fastening pin (2). Attention! Hold on to the door.
14. Replace the fastening pin (6) in the door.
15. Cover the fastening and open holes using the shields (c).
16. Remove the shield (10) from the shield panel (1) and place it on the other side.
17. Replace the shield panel (1) on the device.
18. To mount the handle at the other side of the door, remove the screw caps (a)
and plugs (b).
19. Unscrew the screws from the door handle. Place the handle on the other side of
the door. Insert the plugs into the remaining openings in the door, and place the
screw caps on the screw.
5.3 Operation
Before first use!
•
Before first use, clean the device (6.2 „Cleaning“).
•
Connect the device to a single, grounded outlet.
•
The green standby light will come on. The fan will come on and operate without
interruption.
