- 46 -
Knife protecting device and slice cutting guide (fig. 14)
Fig. 14
o
Undo the bottom bolt (f) of the knife protecting device (
20
) on the rear wall of the
device. Remove the slice cutting guide (
16
). Undo the top bolt (f) and remove the
knife protecting device (
20
) for cleaning.
o
Wash the protective device (
g
) in warm water with neutral cleaning agent.
Wipe additionally with clear water.
Slice tray and housing (Fig. 14)
o
Wash the slice tray (
11
) and housing with use of moist, soft cloth and the neutral
cleaning agent.
o
Dry completely after cleaning.
o
Finally, re-fasten the knife protecting device (
20
) to the device using the bolts (
f
), and
then the slice cutting guide (
16
).
Sharpener
(
fig. 15
)
o
Remove the entire sharpener unit from
the device (
fig. 9
).
o
After sharpening clean the sharpener
elements (
g
) with the cleaning brush
soaked in alcohol.
CAUTION!
Fig. 15
Never use the dishwashing machine for cleaning
the removable elements.
o
Never use chemical or corrosive cleaning agents.
o
In order to avoid rust
never
clean the device with AkoPads or similar, or the wire
washcloth.
o
Always use a soft cloth and never use coarse cleaning agents that could damage or
scratch the surface of the device.
f
16
11
20
g
