Installation and operation
24 / 36
610837
EN
Press the Stop / Reset
button or open the appliance door to clear the
'END'
message in the digital display, before starting another function.
During thermal processing, you may check the convection temperature by
pressing the
button.
Pre-Heating and Thermal Processing with Convection
Your microwave may be programmed to combine the pre-heating process and the
thermal processing with convection.
Example:
To perform pre-heating in 160°C, and then execute thermal processing of 1 hour
and 30 minutes, perform the following steps:
1. Press the
button 5 times to set the required temperature.
2. Press the Start/Quick Start
button.
When the set temperature is reached by the appliance, an acoustic signal sounds,
and
'PREH'
is shown in the digital display.
3. Open the appliance door and place a container with food in the middle of the
rotary plate.
4. Rotate the Time/Menu rotary controller until the correct thermal processing time
(1H:30)
is displayed in the digital display.
5. Press the Start/Quick Start
button.
Mic Grill
In the combined operation mode of microwave and grill, you may obtain the effects
of, both, cooking/roasting and a crispy crust. The preparation time is thus reduced.
This appliance function is especially suitable for au gratin dishes, meat, poultry,
roast potatoes and toast.
This function makes it possible to select two combinations, for which initial
percentage values are pre-programmed for grilling and thermal processing in
microwave mode. The user selects the total time, and the selected combination
suitably controls time proportions for microwave and grill modes.
1. First, press the
button once or twice to set the right combination setting for
a given product.
2. Then, rotate the Time/Menu rotary controller to set the required thermal
processing time.
Содержание 14250M-HLGR
Страница 1: ...14250M HLGR 610837 ...
