Bartscher 14250M-HLGR, Руководство пользователя

Страница: 23 / 36

Installation and operation
610837 21 / 36
EN
1. First, using the button, select the output level, and then use the Time/Menu
rotary controller to set the required thermal processing time.
2. To end with, press the Start/Quick Start button, to start the thermal
processing.
Example:
To heat up products for 5 minutes at the output level of 60%, introduce the following
commands via the control panel:
1. Press the button 5 times.
2. Rotate the Time/Menu rotary controller until the required thermal processing
time is displayed (5:00).
3. To end with, press the Start/Quick Start button.
Attention:
To interrupt the thermal processing, press the Stop / Reset button once.
By pressing the Start/Quick Start button, the thermal processing
commences again.
When you press the Stop / Reset button twice, the entire set thermal
processing program will be cleared.
When the set time of thermal processing elapses, an acoustic signal sounds 4
times, and
'END' is shown in the digital display.
Press the Stop / Reset button or open the appliance door to clear the 'END'
message in the digital display, before starting another function.
During thermal processing, you may check the output level by pressing the
button.