EN
page 35
USER SECTION
6.2
Special Maintenance
Once or twice a year have the machine inspected by a qualifi ed technician, in order to:
1 Clean the solenoid-valve(s) fi lters.
2 Remove scale from the heating elements.
3 Control the status of the seals.
4 Control for components integrity and/or consumption.
5 Control the dispenser(s) effi ciency;
6 A qualifi ed electrician, should check all electric connections inside the machine, at least
once a year.
7. ALARMS
Alarms will be displayed by the lighting of LEDs. according to their typology.
TYPE OF ALARM
CAUSE
REMEDIES
Flashing of the cycle lamp
A
No water fi lling: if you forget to put the overfl ow
pipe in the machine, the water fi lling will last
more than 5 minutes, after that time the ma-
chine turns automatically off. Alarm fl ashing.
Verify the full opening of the water inlet valve or
the right positioning of the overfl ow pipe. Switch
the machine OFF and ON to reset the alarm.
Flashing of Drain light
indicator
G
No drain: if the machine has the drain pump,
and it does not work, or the drain is clogged
up or you forgot to remove the overfl ow pipe;
therefore the machine turns off and the LED
will start fl ashing.
Remove the overfl ow pipe and drain the tank.
Switch the machine OFF and ON to reset the
alarm.
Flashing of light indicator
Q
No boiler heating. If the heating element does
not heat, the machine does not start the rin-
sing cycle. After 5 minutes it will turn off. Alarm
fl ashing.
Boiler thermostat or boiler heating element out of
order. Check them or call for Service.
8. ENVIRONMENTAL ASPECTS
8.1
Packaging
Packaging is made of the following components:
• a wooden pallet;
• a nylon sack (LDPE);
• a multi-layer carton;
• polystyrene (PS) strips;
• polypropylene (PP) banding.
All above materials, shall be disposed and treated in accordance with the Local Laws in
force.
8.2
Disposal
The symbol WEEE/RAEE used on this product indicates that it cannot be treated as domestic
waste. Proper disposal of this product contributes to protecting the environment. For more
information on product recycling, contact the local authorities, domestic waste authorities
or the dealer where the product was purchased.
For product or parts disposal, follow the Council directives 2011/65/UE and 2012/19/UE as
amended and/or application legislative decrees.
The present product or parts cannot be disposed of as urban waste but shall be collected in
separate containers (see the waste bin on wheels symbol with an X on the product).
At the time of product disposal, the user shall refer to the waste electrical and electronic
equipment (WEEE/RAEE) specifi cation.
The manufacturer guarantees the absence of dangerous substances in the EEA used in
conformity to the directive 2011/65/UE.
If the user does not comply with the regulations he/she shall be subject to the penalties
foreseen by each member state.
Disconnect electricity and water before disposal.
Cut away the electrical cable to ensure that further use is impossible.
All metal parts are recyclable as they are made of stainless steel.
Recyclable plastic parts are marked with the plastic material symbol.
?
Содержание 110555
Страница 6: ...EN page 24 ...
