Barton 227C, Руководство по установке

Страница: 20 / 20

Barton Instrument Systems, LLC
900 S. Turnbull Canyon Rd.
City of Industry, CA 91745 USA
(626) 961-2547
On the Web at www.barton-instruments.com
©Copyright 2000, Barton Instrument Systems, LLC. All rights reserved.
Instrument Specifications
Actuating Unit ........................ Model 224C DPU
Dial/Scale Size ....................... 6-inches (150 mm)/13-1/2 inches (340 mm)
Adustments ............................ Zero and Span (micrometer-type)
Mounting ............................... Pipe Yoke, Panel, or Wall
Accuracy ................................ 0-30" w.c. to 200 psi DP
±
1/2% of full scale
0-200 psi to 0-400 psi DP
±
3/4% of full scale
Temperature Limits ................. -40
°
F/
°
C to +180
°
F (+80
°
C)
Product Warranty
A. Warranty
Barton Instrument Systems, L.L.C. warrants that at the time of shipment the products
manufactured by Barton Instrument Systems, L.L.C. and sold hereunder will be free from defects
In material and workmanship, and will conform to the specifications furnished by or approved by
Barton Instrument Systems, L.L.C..
B. Warranty Adjustment
(1) If any defect within this warranty appears, Buyer shall notify Barton Instrument Systems,
L.L.C. immediately.
(2) Barton Instrument Systems, L.L.C. agrees to repair or furnish a replacement for, but not
install, any product which within one (1) year from the date of shipment by Barton
Instrument Systems, L.L.C. shall, upon test and examination by Barton Instrument
Systems, L.L.C., prove defective within the above warranty.
(3) No product will be accepted for return or replacement without the written authorization of
Barton Instrument Systems, L.L.C.. Upon such authorization, and in accordance with
instructions by Barton Instrument Systems, L.L.C., the product will be returned shipping
charges prepaid by Buyer. Replacements made under this warranty will be shipped prepaid.
C. Exclusions from Warranty
(1) THE FOREGOING WARRANTY IS IN LIEU OF AND EXCLUDES ALL OTHER EXPRESSED
OR IMPLIED WARRANTIES OF MERCHANTABILITY, OR FITNESS FOR A PARTICULAR
PURPOSE, OR OTHERWISE.
(2) Components manufactured by any supplier other than Barton Instrument Systems, L.L.C. shall
bear only the warranty made by the manufacturer of that product, and Barton Instrument
Systems, L.L.C. assumes no responsibility for the performance or reliability of the unit as a
whole.
(3) "In no event shall Barton Instrument Systems, L.L.C. be liable for indirect, incidental, or
consequential damages nor shall the liability of Barton Instrument Systems, L.L.C. arising in
connection with any products sold hereunder (whether such liability arises from a claim based on
contract, warranty, tort, or otherwise) exceed the actual amount paid by Buyer to Barton
Instrument Systems, L.L.C. for the products delivered hereunder."
(4) The warranty does not extend to any product manufactured by Barton Instrument Systems,
L.L.C. which has been subjected to misuse, neglect, accident, improper installation or to use in
violation of instructions furnished by Barton Instrument Systems, L.L.C..
(5) The warranty does not extend to or apply to any unit which has been repaired or altered at any
place other than at Barton Instrument Systems, L.L.C.'s factory or service locations by persons
not expressly approved by Barton Instrument Systems, L.L.C..