22
The main functionality that the Wind/Rain alarm integration offers is the ability to close your
vent in response to rain or wind. To do this, tap either the wind/rain alarm status box (Figure 15). On the
following screen showing a table of your alarms and vent, you can tap the green Yes/No boxes to toggle
your preference.
Statistics
The ClimateBoss collects and stores averages for 7 days. Each day it stores average temperature
for each operating stage (DIF, DAY, NIGHT) as well as the average for the 24 hours from the start of DIF
to the end of NIGHT.
To view the controller’s statistics, press Menu > Statistics. You can also access the statistics from
the more section of the controller’s home screen.
The ClimateBoss also tracks the run time of each of the outputs: Heat 1, Heat 2, Cool 1, Cool 2,
Cool 3, Cool 4, and Heat 3 (H and CH versions). The ClimateBoss will store the information until it is reset
and will also display the number of days since the last reset. To view run times, press the Run Times
button in the bottom right of the statistics screen. To reset run times, press the Reset button in the
bottom left of the Run Times screen. A prompt will pop up confirming your decision. Press yes to
proceed.
Daily Averages
Press to view chart of
either zone 1 or 2 daily
averages for each
stage as well as for
24hrs. Goes back 7
days.
Reset Min/Max
Resets today’s
minimums and
maximums. There is
no confirmation box if
you press this.
Min/Max
For each zone values.
Resets at the end of
NIGHT stage.
Run Times
Press to view run
times for each
appliance.
Figure 16: Statistics
