5
Rev. 1.1 (01.2021)
The flow-controlled system: mpSmart-Lowdosing
Flow Controlled System
–
„
mpSmart-Lowdosing
“
This Flow Control System is a smart module for precise and regulated dosing of liquids. An onboard
Arduino reads out a flowmeter made by Sensirion, comparing it to a target value and operates the
mp6 micropump corresponding to a PID-regulator. The attached PC-software can be used to monitor,
control and log the flowrate
Components
mp6-hyb micropump
Damper
Flowmeter (Sensirion SLF3s-0600F)
Tubing
Tubing connectors
Driver Board
Software with GUI
min. Flowrate
5 µl/min
1
max. Flowrate
1000 µl/min
1
Accuracy
<±5%
Software calibration
Water
USB-port
one
Input Voltage
5V
Operating temperature
+5°C bis +45°C
Materila in Contact with Fluid
PPSU, silicon, PP, PPS, stainless steel, Tygon,
epoxy based adhesive
Lifetime
5000 h
Self-priming
yes
Dimensions
9.5 cm x 9.5 cm x 3.5 cm
Pumping media
Liquid (water)
1
Bedingung: Destilliertes Wasser (25°C), Raumtemperatur 23°C
2
Bedingungen: Saugdruck < 10 mbar, DI-Wasser, max. Förderleistung wird erst nach wenigen Minuten Betriebszeit erreicht
³
Bedingungen: Luft, Raumtemperatur 23°C, mp-x: 100 Hz, 250 V, SRS
