Tech 500
User Guide rev1.0
JUNE 2013
33
Results Audit System
The Tech500 is capable of presenting all of its stored data within one or more computer files
when connected to a PC via an USB lead. This is the same ‘Mass Storage Mode’ such as used in
USB memory devices. No extra drivers or software have to be loaded onto the pc.
The files and the stored TPM Data enable the Tech500 to be used as part of an Auditing System.
The tool automatically goes into Mass Storage Device (MSD) mode when connected to an active
USB port on the pc.
It is not necessary to power up the tool prior to connecting to the pc - it will power up
automatically.
It is important not to accidentally press the enter key on the tool at the same time as
connecting to the pc.
The Tech500 will produce a single file for each type of TPM Part that has been read, and a
separate record within that file for each unique TPM of that type.
Viewing the Audit Files
To begin using the Auditing System ensure that the tool has some data available, indicated by
the Data Indicator icon, and then connect the Tech500 to a PC via its USB lead.
The PC will begin communicating with the Tech500. Once communication is established the
Tech500 will act as a MSD (Mass Storage Device). If the MSD does not automatically open its
explorer window on the PC, then the user may browse for the newly connected device
manually.
Once the explorer window is open, you may view a file by right clicking on the file and selecting
Open from the pop-up menu.
