Installation
Ex p Control unit
SILAS
pz
Page 24 of 88
A1-37S2-7D0001_pz_Manual_Exp-Control-Unit_20210923_0_en.docx
Rev. 0
Assembly "External mounting kit, type 05-0091-0280"
For external mounting of the Ex p control unit, the two measuring points must be
routed into the Ex p control cabinet using the "External" mounting kit.
Procedure:
Drill two mounting holes d=10.5 mm at the intended location of the
pressurized equipment.
Insert the tube bulkhead fitting pos. 2 into the hole.
Fasten the bulkhead fitting in the center of the hole using the nuts (pos. 1
and 3).
Insert the hose pos. 4 into the hose bulkhead fitting. The other end is
plugged into the hose connection provided on the Ex p control unit.
For the second borehole, proceed in the same way as for the first
borehole.
Schematic diagram:
