Bartec SILASPZ, Руководство пользователя

Страница: 21 / 90

Transport and storage
Ex p Control unit
SILAS pz
Page 20 of 88 A1-37S2-7D0001_pz_Manual_Exp-Control-Unit_20210923_0_en.docx Rev. 0
4 Transport and storage
Scope of delivery
Missing parts or damage must be reported immediately in writing
to the forwarding agent, the insurance company or BARTEC
GmbH.
Check the completeness of the scope of delivery using the delivery note.
As standard, each Ex p control unit is delivered with the following scope of
delivery:
Parameterization cable LAN
Parameterization switch
Operating instructions
Packaging
The Ex p control unit is delivered packed in film, on pallets and/or in boxes.
Dispose of the packaging materials at the designated disposal points.
Observe the applicable national regulations for disposal.
Transport
WARINING
DEATH OR RISK OF INJURY FROM FALLING HEAVY SUSPENDED LOADS.

Never stand under suspended loads.

Secure the Ex p control unit before transport using suitable fastening
(e.g. straps)
ATTENTION
AVOID HARD IMPACTS, E.G. BY FALLING DOWN OR SETTING DOWN TOO
VIGOROUSLY.
The Ex p control unit may be damaged.

Only use hoists and load handling attachments with sufficient load
bearing capacity.

The permissible lifting weight of a lifting device may not be exceeded.

Slowly set down the control unit.
Observe the weight of the goods to be transported and select an adequate
transport device.