Operation and Installation Manual PBTC-200-E
21-54C3-7D0001/A
05/2023-EHT-441168
Notice:
Technical data subject to change without notice.
No claims for damage arising from alternations, errors or misprints shall be allowed.
Page 15 / 40
ELS-200 high profile end seal
End seal for access above the insulation.
2 pipe straps per mounting stand required.
For a complete list of kit contents and approvals see
data sheet.
Catalog No.: ELS-200
Part No.: 27-54E2-AA12A000
Resistance Temperature Device Pt100
Enables measurement of the process temper-
ature in the measuring range -50°C to 200°C,
protection class IP65
Resistance Temperature Device Pt100
(mineral insulated)
Enables measurement of the process temper-
ature in the measuring range -50°C to 500°C,
protection class IP54
See data sheet for further technical data
Connection cable length 1,5 m,
Sensor length 40 mm
Order No.: 122776
Part No.: 03-9040-0006
Connection cable length 5,0 m,
Sensor length 40 mm
Order No.: 128628
Part No.: 03-9040-0010
Connection cable length 1,5 m,
Sensor length 1,0 m
Order No.: -
Part No.: 03-9040-0017
6.4
Spare parts
On pipe cable gland kit and end seal
Spare parts kit for use with heating cable
PSB, MSB, HSB+, HTSB for replacement of
damaged or lost parts.
Catalog No.: CAK-SRS
Part No.: 27-59CX-9C01/0001
Multi-kits available on request.
CAK-E5/E10 Cold applied end seal
Silicone end seal for insulation of the end of
the trace heater. Suitable to all Bartec paral-
lel trace heating cable. Approved accordingly
IECEx, ATEX, CSA (ordinary and hazardous
locations)
CAK-E5
5 pcs.
CAK-E10
10 pcs.
CAK-E5:
Catalog No.: CAK-E5
Part No.: 27-59CZ-90000005
CAK-E10:
Catalog No.: CAK-E10
Part No.: 27-59CZ-90000010
