10
11
CARE AND MAINTENANCE
Your metal detector is an example of superior design and craftsmanship. The
following suggestions will help you care for your metal detector so you can enjoy it
for years.
Handle the detector gently and carefully. Dropping it can damage circuit boards and
can cause the detector to work improperly.
Use the detector only in normal temperature environments. Temperature extremes
can shorten the life of electronic devices, causing internal damage to the detector.
Keep the detector away from dust and dirt, which can cause premature wear and
tear of parts.
Wipe the detector with a damp cloth occasionally to keep it looking new. Do not use
harsh chemicals, cleaning solvents, or strong detergents to clean the detector.
TROUBLE SHOOTING GUIDE
Problem
Reason
Suggestion
The detector
sounds false
signals.
Sensitivity set too
high/environmental
electromagnetic interference.
Reduce SENSITIVITY.
Sweeping the detector’s
search coil too fast or at
wrong angle.
Sweep the search coil more
slowly and hold the detector
correctly. For more details,
please see the section of
“Testing and Using
Using 2 detectors in close
proximity
Keep two detectors at least 6
meters(20’) apart
The detector does
not function
Five-pin cable not connected
well
Re-plug it properly.
Dead battery
Replace batteries
Metal Detector
WINBEST® by BARSKA®, as manufacturer, warrants this new product to be free of
original defects in materials and/or workmanship for the length of time specified by this
warranty. This warranty does not include damage caused by abuse, improper handling,
installation, maintenance, normal wear-and-tear, unauthorized repairs or modifications
and tampering in anyway.
This warranty is limited to the original purchaser and is not transferable. This warranty
applies only to products purchased in the United States of America.
In the event of a defect within 30 days, the consumer must return the defective unit to the
WINBEST® by BARSKA® dealer (the place of purchase) at his/her own expense.
Beyond 30 days, WINBEST® by BARSKA® products should be sent to the following
address for warranty repairs. Products must be packed carefully and sturdily to prevent
damage in transit, and returned freight prepaid to:
WINBEST® by BARSKA®
855 Towne Center Drive
Pomona, CA 91767
For additional and updated information
please visit www.barska.com
Please email [email protected] or call 1.888.666.6769 for Return Merchandise Number
(RMA#) before any returns.
NOTE: All merchandise received without a valid RMA# will be returned to shipper at his/
her own expense.
Please include all of the following when returning WINBEST® by BARSKA® products for
service and/or replacement:
1. Please write your complete details (Name, Address, Telephone #, E-mail address,
RMA#, etc.)
2. Purchase receipt or Proof of Purchase. (Original/Copy)
3. A brief explanation of the defect
4. A Check/Money Order of $20.00 to cover inspection, shipping and handling
*Please allow 6-8 weeks for delivery
This product will either be replaced or repaired at the discretion of the warrantor. If it’s
a discontinued item, we will replace the product with an equivalent product. Should the
repair not be covered by this warranty, an estimate will be sent for your approval. Non-
warranty repairs or refurbishing are always provided at a reasonable cost.
WINBEST® by BARSKA® shall not be liable for any consequential, incidental and/or
contingent damages whatsoever. We will not pay shipping, insurance or transportation
charges from you to us, or any import fees, duties and or taxes. This warranty supersedes
all previous Winbest® by BARSKA warranties.
©2017 BARSKA®
BC563
1 YEAR LIMITED WARRANTY
10/17
