Barrus X05 Скачать руководство пользователя страница 5

Страница: 5 / 88

RDG603B2

– Issue 1

Page 5 of 88

Operators Manual

NOTICE:

THIS MANUAL FORMS AN INTEGRAL PART OF THE OUTBOARD IT ACCOMPANIES,

IF A TRANSFER OF TITLE OCCURS, IT MUST ALWAYS BE HANDED OVER TO THE

NEW OWNER.

Thank you for purchasing this electric outboard motor from Barrus. This manual has been

compiled to help you to operate your outboard and its associated parts with safety and

pleasure. Please read it and familiarise yourself with the outboard and its parts before

operation.

The information and recommendations given in this manual are based on the latest

information available at the time of publication. Barrus reserve the right to change the

specification of its products and manuals without prior notice.

Depending upon the equipment specification of the outboard and accessories fitted, there

may be discrepancies or differences with the information presented in this handbook. No

claims may be pursued in this respect.

Ensure that you read and understand the contents of the manual before attempting to operate

the unit.

Disclaimer:

All product, product specifications and data are subject to change without notice

to improve reliability, function or design or otherwise. All product information is correct at the

time of issue.

Содержание X05

























































































Результаты поиска

Содержание X05

Отзывы:

Бренды по названию

Популярные бренды

Barrus X05, Руководство оператора

Результаты поиска

Содержание X05

Отзывы:

Бренды по названию

Популярные бренды