Barrus X05 Скачать руководство пользователя страница 35

Страница: 35 / 88

RDG603B2

– Issue 1

Page 35 of 88

3. Starting Procedure (Outboard motor with speed and direction control lever)

•

Ensure that the lever is in the neutral position.

•

Attach the safety lanyard to the control lever connected to the outboard (

Figure 26

Figure 26: Safety Lanyard attached to control lever

•

Attach the other end of the safety lanyard to the operator’s life jacket or leg.

The outboard will not operate if the safety lanyard is not mounted in its correct

location.

*Note:

The lever must be installed to move the boat forwards when the lever is moved

forward.

•

Press the power button. The light on the button will illuminate green.

•

Press the locking safety button on top of the lever down.

•

Slowly push the speed and direction control lever in the direction required (forwards

or backwards) to start the outboard.

•

To increase the speed, move the speed and direction control lever further forwards.

Locking Safety
Button

Safety
Lanyard

Power (on/

off) Switch

Содержание X05

























































































Результаты поиска

Содержание X05

Отзывы:

Бренды по названию

Популярные бренды

Barrus X05, Руководство оператора

Результаты поиска

Содержание X05

Отзывы:

Бренды по названию

Популярные бренды