background image

3104CMS OPERATOR’S MANUAL                       9/6/18                                     Page 4 of 13 

 

SAFETY INSTRUCTIONS OVERVIEW 

READ ALL SAFETY AND OPERATING INSTRUCTIONS BEFORE OPERATING! 

ANYONE ASSISTING 3107C OPERATION IS ALSO CONSIDERED AN OPERATOR. 

FOLLOW ALL SAFETY INSTRUCTIONS WHILE OPERATING! 

MAKE SURE OTHERS FOLLOW THEM TOO! 

 

 

DANGER: 

Stay clear of moving parts. Belts, chipper blades and other moving parts can cut off 

fingers, arms, legs and other body parts. Contact with moving parts while the machine is 

operating will cause death or serious injury.  

 
DANGER: 

Never reach into the 3107C, while running or capable of running. Reaching into the 

3107C will result in death or serious injury. 
 

DANGER: 

Only operate outdoors and avoid breathing engine exhaust fumes. Engine exhaust 

contains carbon monoxide gas which is toxic. Breathing it can cause unconsciousness and death. 
 

DANGER:

 Never permit anyone to ride on the 3107C while towing. The 3107C is NOT 

intended to carry passengers; carrying passengers on the 3107C will result in death or serious 

injury. 

 

DANGER:

 Never operate the 3107C with any guards, flaps or screens removed. If a moving 

part is readily accessible a guard is not present and must be installed before operating. 

 

DANGER:

 Do not leave the 3107C unattended with the engine running or the key accessible.  

Always turn off the engine and remove the key when not using the 3107C. 
 

DANGER: 

Do not operate the 3107C under the influence of: alcohol; illicit drugs; prescription 

drugs that warn against driving or operating machinery, or any substance that will impair 

judgment or physical coordination. 

 

DANGER

: Never permit a minor (under 18) to operate the 3107C. Never permit anyone with a 

mental or physical impairment that will adversely affect safe 3107C operation to operate the 

3107C. 
 

WARNING: 

Wear appropriate personal protective equipment, safety glasses, ear plugs hard 

hat, gloves, and boots.  DO NOT wear loose clothing, jewelry, long hair or anything that may 
get caught in a moving part.   
 

WARNING:

 Do not stand or step on the 3107C. There is no place on the 3107C for someone to 

stand or step. Standing or stepping on the 3107C will put you in close proximity to dangerous 

moving parts and extremely hot engine components.   

 

WARNING

: Stay clear of the chute on the 3107C while in operation. High speed debris exits 

the chute of the 3107C. 

 
 

Содержание 3107C














Отзывы: