Baroness SP05A, Руководство по эксплуатации для владельца

Страница: 47 / 76

1 Piston pump
2 Unload valve operating pins
3 Bolt
4 Lock nut
Important
When pushing in the unload valve operating
pins, be careful about overtightening the bolts.
The unload valve operating pins may be
damaged.
Tighten the bolts, and then push in the
unload valve operating pins to open the
unload valve.
1
2
3
4
gay3t1-003
Towing The Machine_003
1 Piston pump
2 Unload valve operating pins
3 Bolt
4 Lock nut
Important
Before towing, be sure to open the unload
valves in two locations.
Close the rear cover and apply the cover
fastener.
Remove the wheel stopper.
Release the parking brake.
Warning
While towing, always keep your foot on the
brake pedal and depress the brake pedal at
any time to stop.
Tow the machine slowly.
8.
9.
10.
11.
12.
Operations
Rake
Warning
Do NOT start to move or stop the machine
abruptly.
Caution
Perform operations at an appropriate speed
for the site and location.
Caution
Before starting operations, check that the area
where the operations are to be performed is
safe.
Caution
Before raising or lowering the rake, make sure
that there are no people around the rake.
Start the engine.
"Procedure to Start Engine" (Page 4-17)
Important
If the engine rpm is low, the rake will not be
raised and lowered due to insufficient
hydraulic oil.
Move the throttle lever above the middle
position toward "High speed".
Make sure that the rake section is raised.
Make sure that all the attachments are
raised if any installed.
Firmly depress the brake pedal and release
the lock fitting.
The parking brake is released at the same
time.
Gradually move the throttle lever to "High
speed", and rev up the engine to MAX.
1.
2.
3.
4.
5.
Handling Instructions
SP05A
Handling Instructions
Page 4-27
Operations