Baroness SP05A, Руководство по эксплуатации для владельца

Страница: 36 / 76

Adjustment of Blade
Note:
Depending on the specifications, this function
may not be available.
The blade can be adjusted with the bolt.
Loosen the bolt, and then move the small
blade to the desired position.
Toward A to take a thin layer from the
surface of the sand
Toward B to take a thick layer from the
surface of the sand
Tighten the bolt.
5b7smu-001
A
B
1
2
Adjustment of Blade_001
1 Bolt
2 Small blade
1.
[1]
[2]
2.
Adjustment of Finishing Brush
Note:
Depending on the specifications, this function
may not be available.
The height of the finishing brush can be
adjusted by moving the right and left movable
arms while griping the right and left clutch
levers.
Return the clutch levers after adjusting the
height of the brush on the ground according to
the bunker conditions.
The mounting height can be adjusted to one of
four levels.
When traveling, adjust to the lowest position.
1
2
f5zgea-001
Adjustment of Finishing Brush_001
1 Clutch lever
2 Movable arm
When used for light finishing, adjust to the
position second from the bottom.
1
2
f5zgea-005
Adjustment of Finishing Brush_002
1 Clutch lever
2 Movable arm
1.
2.
SP05A
Handling Instructions
Page 4-16
Adjustment before Work