Baroness SP05A, Руководство по эксплуатации для владельца

Страница: 42 / 76

1 Up/down switch lever
A UP
B DOWN
2WD/3WD Selector Lever
Note:
Depending on the specifications, this function
may not be available.
Important
When switching between 2WD and 3WD
operation, make sure to stop the machine
completely.
The 2WD/3WD selector lever is on the right
side of the driver's seat and is used to switch
the traveling and operation mode.
Shift the 2WD/3WD selector lever to the
"2WD" position to operate in rear-wheel
2WD.
Shift the 2WD/3WD selector lever to the
"3WD" position to operate in all-wheel 3WD.
A B
zobt1g-001
2WD/3WD Selector Lever_001
A 2WD
B 3WD
Use of 2WD or 3WD
Use 2WD when working with the blade and
high-speed traveling (maximum 16 km/h) is
possible.
Use 3WD when working on steeply sloped or
soft bunkers or bunkers with a small
diameter.
Light Switch
Note:
Depending on the specifications, this function
may not be available.
･
･
*
･
･
Caution
The lights provide auxiliary lighting.
Do not travel or operate the machine at night
or under poor visibility.
The light switch is located in the operation
panel.
Flip the switch up to turn the light on, and down
to turn the light off.
A
B
1
bnec97-025
Light Switch_001
1 Light switch
A ON
B OFF
Traveling Pedal
The traveling pedal is located in the right foot
area.
When depressed "Forward", the machine
travels forward. When depressed "Backward",
the machine travels in reverse.
If the pedal is secured with the speed
adjustment plate during operation, the machine
can be operated at a constant speed.
1
2
yo3h9x-001
Traveling Pedal_001
1 Forward
2 Backward
SP05A
Handling Instructions
Page 4-22
Operation Method