Baroness LM56GC, Руководство по эксплуатации для владельца

Страница: 73 / 88

Installing The Bed Knife Base
Caution
Both the reel cutter (cutting cylinder) and the
bed knife (bottom blade) are edged tools.
Handle them carefully, since they could cut
your hands and feet.
Caution
When handling the reel cutter (cutting
cylinder) or bed knife (bottom blade), wear
gloves to protect your hands.
Pay attention not to let the reel cutter (cutting
cylinder) catch your gloves. Otherwise, you
may injure your hand or fingers.
Caution
While operations are performed with the front
of the machine raised, it may fall.
Securely support the machine.
Important
Make sure that there is no binding at the cam
bushes in the frame of the mower unit.
Temporarily install the bed knife base
COMP onto the machine with the left and
right cutter pins and lock nuts.
Note:
At this time, tighten the lock nuts to the
heads of the cutter pins, but do not allow
the lock nuts to contact the cam bushes.
2
3
4
1
kx7caa-001
Installing The Bed Knife Base_001
1 Bed knife base COMP
2 Cutter pin
3 Lock nut
4 Cam bush
1.
Important
Install the bed knife base arm Assy parallel to
the frame.
During installation, be careful not to twist both
arms.
Insert the bed knife base arm Assy into the
bed knife base COMP.
Temporarily install the bed knife base arm
with the bolt of the fulcrum seat.
2
3
4
1
kx7caa-002
Installing The Bed Knife Base_002
1 Bed knife base arm Assy
2 Bolt
3 Spring washer
4 Washer
Tighten the bolt used to install the bed knife
base arm Assy, and then firmly secure it.
1
2
3
kx7caa-003
Installing The Bed Knife Base_003
1 Bolt
2 Spring washer
3 Washer
Important
Do not tighten the left and right lock nuts.
Tighten the left and right cutter pins used to
temporarily install the bed knife base
COMP.
2.
3.
4.
5.
Maintenance
LM56GC
・
LM66GC / LM66TC
Maintenance
Page 5-17
Maintenance Work